Flite Test FT EZ ID – Remote ID Module

About this product

Flite Test, in conjunction with Tritium Electronics, a leader in electronics assembly, has designed a USA-developed and manufactured Remote ID Broadcast Module, the Flite Test EZ ID.

FT EZ ID provides an excellent, high-value solution for both RC model airplane pilots as well as recreational drone pilots. It’s light, has internal antennas, and has integrated GPS and Bluetooth 4 and 5 transmitters. The FT EZ ID is also designed to be installed easily and then removed and installed on a pilot’s entire fleet of recreational aircraft.

The FT EZ ID weighs only 10 grams, less than one-third of an ounce, and can be powered by 2S to 8S batteries. It also provides an integrated GPS receiver and a Bluetooth transmitter with antennas etched on the printed circuit board, reducing the total weight and functions without any external antennas hanging off the aircraft. The average power draw of the FT EZ ID is a low, ten milliamps, meaning there will be a small power penalty when using the FT EZ ID on radio control fixed wing or multirotor aircraft.

Features

FT EZ ID is 100% both designed and manufactured in the United States, thanks to a tremendous amount of hard work between Flite Test, Tritium Electronics, and the FPVFC.
FT EZ ID provides an excellent, high-value solution for both RC model airplane pilots as well as recreational drone pilots. The desire was to provide the lightest, most versatile, remote ID solution that can easily go between aircraft.
FT EZ ID weighs just 10g and can be powered from a 3.3V battery all the way up to an 8-cell battery. It also provides an integrated GPS receiver and a Bluetooth transmitter (4 and 5) with antennas etched on the printed circuit board, reducing the total weight and functions without any external antennas hanging off the aircraft. The average power draw of the FT EZ ID is a low, 10 milliamps, meaning there will be a small power penalty when using the FT EZ ID on radio control fixed wing or multirotor aircraft.
The FT EZ ID is also designed to be installed easily and then removed and installed on a pilot’s entire fleet of recreational aircraft; it can also be mounted within a multirotor stack using its 20×20-millimeter mounting holes.
The future features of the FT EZ ID are limitless and will make compliance only a small portion of its purpose. When using the free Flite Test app, you can unlock additional features with your FT EZ ID, such as “Find my plane.” Additional features like Logbook and so much more will be soon following that will not only help preserve memories but also recognize great achievements in flying and growing the hobby.
FT EZ ID Pigtails included!