APD 200F3[X]v2 ESC

The improved F_Series 200F3[X] ESCs. Building upon our trusted ARM 32-bit architecture, the V2 release features introduce a number of highly requested features into the product range, including configuration options and additional drive modes. The 200F3[X]v2 ESCs are drop-in replaceable to 200F3[X] units. As before, existing features include PWM-frequency dithering and Active Phase-Current Demagnetisation, allowing for smooth control with virtually all powertrain combinations with peak power outputs of up to 18 kW.

NDAA/DFARS-compliant options available upon request.

New Feature Set (v2)

• Configuration of drive parameters, signal types and fault handling

• On board bootloader

• Additional Telemetry types: PWM Telemetry and RPM Output

• High-speed telemetry rates when operating DShot

• Reversible operation support (full forwards to full reverse)

• Dynamic signal quality checks across supported input protocols

Feature Set

• Designed and manufactured in Australia using only the highest quality components, ensuring no sacrifice in reliability

• Proprietary firmware designed in Australia

• Plug and play firmware

• Up to 14S (60 V) capable

• Up to 200 A continuous* output current

• 300 A Burst current

• True 10-bit resolution

• Virtually no setup time, with simple motor reverse solder tab

• Auto-detect PWM or DShot

• DShot150 to DShot600 capable (0.15-0.6Mbs/s)

• Up to 750,000 eRPM (protocol dependant)

• Motor agnostic

• Auto PWM output frequency

• Auto timing advance

• Telemetry output

• Automatic current limiting and over-temperature protection

• LED indication

• Digital commands over ProShot (including anti-turtle mode)

• Digital commands over DShot

• Bare-PCB design to allow maximum integration within the end setup

• 8-Layer PCB to ensure minimal track resistance

* Continuous current ratings are at a 100% throttle duty cycle. Continuous rating is defined as max sustained current at 100% throttle for 60 seconds with 33 m/s of airflow.

Documentation and Datasheets can be found at: docs.powerdrives.net

Additional Information

Weight: 0.036kg

Dimensions: 73x34x20mm