RadioMaster Zorro & TX12 AG01 Mini CNC Hall Gimbal – Self Centering

Specifications

Adjustable Vertical Travel Range: 38°—54°
Name: AG01 Mini CNC Hall Gimbal
Temperature Range: -20°C-85°C
Self-centering adjustment: Yes
Linearity: Real-time (No delay)
Easy mode adjustment: Yes
Working voltage: DC 3.3V
Sensor Type: Hall Sensor
Adjustable tension: Yes
Weight: 42g(±0.3g)
Size: 49x42x48mm
Quad bearing: Yes

About this product

This Radiomaster AG01 Mini CNC Hall Self-Centering Gimbal is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. Featuring front-accessible tension and travel adjustment for easy fine-tuning. The AG01 will take your TX12 or Zorro to the next level. From the aviation-grade aluminum construction, non-contact hall sensors, and pre-installed Sticky360 Mini Gimbal Sticks, be prepared to revolutionize your compact radio experience!

Features

Non-contact hall sensors for accurate control inputs and precise centering.
Made with CNC-processed aviation-grade aluminum.
Adjustable vertical travel angle (Min. 38°, Max. 54°)
Quad precision bearings for unparalleled stick feel.
Custom designed for RadioMaster Zorro & TX12
Sticky360 Mini Gimbal Sticks as standard.
Self-Centering Gimbal

RadioMaster Mini AG01 Gimbal Self-Centering

INSTALLATION INSTRUCTIONS FOR ZORRO RADIO

The Zorro radio is configured as Mode 1 or Mode 2 by the screws mounted in the rear case of the radio. Both gimbals should be installed in a self-centering configuration (as default out of the box) in the Zorro radio. Once the radio is re-assembled the screws in the rear case of the Zorro will set the throttle gimbal.

INSTALLATION INSTRUCTIONS FOR TX12 RADIO

One gimbal must be set as throttle and one as self-centering before installation in the radio.
1. Use the included screw (see parts bag) to hold down the centering lever and set the gimbal as a throttle gimbal.
2. Adjust the throttle tension bar until the desired tension is achieved.