Specifications:
- Brand: HSKRC
- Model: MAK6
- Color: Red/Grey/Blue
- Item name: 260mm Wheelbase Frame Kit
- Wheelbase:260mm
- Arm thickness: 5MM
- Upper center board: 2.5MM
- Lower center plate: 2.5MM
- Camera protection frame board thickness: 2MM
- Plywood thickness: 2MM
- Size: 162*203MM
- weight: about 120g/130g(3D Prints included)
Recommended configuration(not included):
- Flight control: F4/F405/F722
- Motor: 2207/2305/2306
- ESC: 30A-50A Split/4-in-1
- Battery: 4S 1500mAh ~ 6S 1300mAh
- Propeller: supports up to 6 inches (6042)
Features:
- -Flight is smooth and FPV shooting is easier and more elegant.
- -H-shaped structure does not affect the flying experience at all. On the contrary, compared with the X-shaped structure, the arm is shorter and lighter. At the same time, the arm strength is higher.
- -The H-shaped layout has more installation space in the middle section of the cabin and a lower center of gravity, making the flight more stable.
- -The installation size of the FPV lens is 19mm wide, suitable for micro lenses such as Flathead Brother 2, Raze micro/Toothless micro.
- -Flight control installation positions with two hole spacings of 30.5*30.5 and 20*20 are reserved at the front and rear of the cabin. Suitable for the installation of a variety of flight control equipment.
- -Fixed motor mounting hole spacing: 16*16/16*19/19*19mm are compatible.
- -The corners of the entire machine are chamfered to create a fine workmanship and reasonable structure. Of course, there are also customized thickened aluminum tubes to ensure the strength of the frame.
Package Included:
1x Frame Kit
